Master Bilt Refrigerator MCR 33 101 User Manual

ITEM NO. __________________________________________________  
PROJECT __________________________________________________  
LOCATION_________________________________________________  
DATE _________________________ QTY. _______________________  
Full-length  
evaporator coil  
and vertical fan  
tower provide  
evenly distributed  
cooling.  
MCR-33-101 &  
MCR-33-102 SERIES  
Roll-in & Pass-Thru  
Blast Chillers  
ROLL-IN MODELS  
MCR-33-101  
PASS-THRU MODELS  
MCR-33-101PT  
MCR-33-102  
MCR-33-102PT  
MCR-33-101  
FEATURES  
CONSTRUCTION  
CONTROL PANEL  
COOLING TIME  
• Stainless steel interior and exterior  
with polyurethane foamed-in-place  
insulation  
• Interior light  
• Door gasket heater  
• HACCP compliant recording features  
• Surface mounted on exterior of blast  
chiller  
• On/off switch  
• Digital readout of interior ambient  
temperature  
• Maximum load of 260 pounds of  
food requires approximately 90 min-  
utes per cooling cycle depending on  
food density and input temperature  
of food  
• High velocity forced air convection  
through evaporator coil  
• Digital cycle timer  
WARRANTY  
• HACCP compliant recording ther-  
mometer for blast chiller ambient  
air temperature (requires printer to  
have record)  
• Microprocessor control system  
enclosed in easily accessible box  
• Automatic air defrost cycle  
• Automatic hold cycle  
Standard limited one year extended  
compressor (optional four year ex-  
tended warranty available), one year  
limited parts, limited 10 year panel  
• 4 food temperature probes with se-  
quential readout display in MCR-33-  
101, 8 probes in MCR-33-102  
• Automatic chill cycle control with  
food temperature probes  
• Audible alarm at end of chilling cycle  
RACK  
• Racks provided:  
– MCR-33-101.............................. 1  
– MCR-33-102.............................. 2  
• Stainless steel construction  
• Accomodates 26 pans, 12" x 20" x  
21/2", two per each of 13 ledges  
• Ledges on 41/2" spacing  
• Each pan holds up to 10 pounds of  
food for total rack quantity of 260 lbs.  
• Rack dimensions: 241/2" wide x 27"  
deep x 685/16" high  
DOORS  
• Door dimensions: 30" x 78"  
• Flush mounted  
• 36" high 16 ga. stainless steel kick-  
plate on door exterior  
OPTIONS  
Optional finishes  
Add suffix “C” for correctional  
model  
Printer package  
Extended four year compressor  
warranty  
REFRIGERATION SYSTEM  
• An air- or water-cooled condensing  
unit will be supplied depending on  
application.  
• Rack mounted on heavy-duty swivel  
casters  
908 Highway 15 North • New Albany, MS 38652  
 
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS  
All condensing units must include a suction accumulator. Pull down time reflects time neces-  
sary to lower listed quantity of food from 140°F to 40°F. All units listed contain R-404A refrigerant.  
UNIT CONNECTION  
SIZES  
BTUH  
@ -10°F  
SUCTION  
DIMENSIONS  
SEE  
DRAWING...  
(PP. 4-5)  
COND.  
UNIT  
MODEL*  
RECEIVER  
PUMPDOWN  
CAP. @ 90%  
SHIP  
WT.  
(LB/KG) MCA**  
H.P. TEMP.** LIQUID SUCTION  
MOP**  
RLA**  
LRA**  
MCR-33-101, 200 LB. CAPACITY, 2 HOUR PULL DOWN TIME  
MSLZ0101C  
MHLZ0121B  
MCLZ0111B  
MCLZ0111C  
3
3
3
3
10,653  
11,559  
10,372  
10,343  
3/8  
1/2  
1/2  
1/2  
7/8  
1-1/8  
7/8  
M2  
M2  
M2  
M2  
11.4  
11.4  
11.4  
11.4  
200/91  
260/118  
330/150  
330/150  
20  
30  
24  
19  
30  
45  
35  
25  
11.1  
19  
14.7  
10  
77  
105  
86  
7/8  
82  
MCR-33-101, 200 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME  
MSLZ0151C  
BSLZ0400B  
BSLZ0400C  
BSLZ0400E  
BCLZ0280B  
BCLZ0280C  
BCLZ0280E  
4
4
4
4
3
3
3
14,994  
15,047  
15,047  
15,047  
15,529  
15,529  
15,529  
1/2  
1/2  
1/2  
1/2  
5/8  
5/8  
5/8  
7/8  
7/8  
7/8  
7/8  
11/8  
11/8  
11/8  
M2  
C
C
C
C
11.4  
41.5  
41.5  
41.5  
41.5  
41.5  
41.5  
230/105  
510/232  
510/232  
510/232  
505/230  
505/230  
505/230  
32  
42  
32  
20  
32  
32  
20  
40  
60  
40  
20  
40  
35  
20  
15  
26.8  
15  
8.2  
15  
99  
129  
99  
50  
105  
112  
56  
C
C
12.6  
6.2  
MCR-33-101, 250 LB. CAPACITY, 2 HOUR PULL DOWN TIME  
MSLZ0151C  
MCLZ0141B  
MCLZ0141C  
BSLZ0400B  
BSLZ0400C  
BSLZ0400E  
BCLZ0280B  
BCLZ0280C  
BCLZ0280E  
4
3
3
4
4
4
3
3
3
14,994  
13,799  
13,903  
15,047  
15,047  
15,047  
15,529  
15,529  
15,529  
1/2  
1/2  
1/2  
1/2  
1/2  
1/2  
5/8  
5/8  
5/8  
7/8  
13/8  
11/8  
7/8  
7/8  
7/8  
11/8  
11/8  
11/8  
M2  
M2  
M2  
C
C
C
C
C
C
11.4  
11.4  
11.4  
41.5  
41.5  
41.5  
41.5  
41.5  
41.5  
230/105  
500/227  
500/227  
510/232  
510/232  
510/232  
505/230  
505/230  
505/230  
32  
28  
26  
42  
32  
20  
32  
32  
20  
40  
40  
35  
60  
40  
20  
40  
35  
20  
15  
16.7  
12.8  
26.8  
15  
8.2  
15  
12.6  
6.2  
99  
105  
112  
129  
99  
49.5  
105  
112  
56  
MCR-33-101, 250 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME  
MSLZ0181C  
MDLZ0201C  
5
3
18,945  
19,518  
1/2  
1/2  
11/8  
11/8  
M3  
M3  
15.2  
15.2  
240/109  
530/241  
36  
38  
55  
45  
21.4  
16.8  
123  
102  
MCR-33-101, 250 LB. CAPACITY, 1.3 HOUR PULL DOWN TIME  
BSLZ0600C  
BCLZ0400C  
BCLZ0400E  
BSLZ0600E  
6
4
4
6
21,651  
21,531  
21,531  
21,651  
1/2  
5/8  
5/8  
1/2  
7/8  
13/8  
13/8  
7/8  
C
C
C
C
41.5  
41.5  
41.5  
41.5  
550/250  
530/230  
530/230  
550/250  
41  
44  
22  
21  
60  
60  
30  
25  
23.9  
26.3  
10.2  
9.3  
156  
161  
60  
70  
MCR-33-101 250 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME  
BCLZ0750C  
BCLZ075UE  
71/2  
71/2  
37,322  
37,322  
7/8  
7/8  
13/8  
13/8  
D
D
53.4  
53.4  
730/332  
730/332  
55  
32  
80  
40  
31.5  
16.1  
161  
83  
MCR-33-101 250 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME – WATER COOLED CONDENSING UNITS  
SCLZ075WC 71/2  
SCLZ075WE 71/2  
39,600  
39,600  
5/8  
5/8  
13/8  
13/8  
D
D
78.4  
78.4  
730/332  
750/341  
50  
32  
80  
40  
31.5  
16.1  
161  
83  
MCR-33-102, 400 LB. CAPACITY, 2 HOUR PULL DOWN TIME  
MSLZ0221C  
MDLZ0231C  
BCLZ040LC  
6
4
4
23,018  
22,958  
23,171  
1/2  
1/2  
5/8  
11/8  
11/8  
13/8  
M5  
M3  
C
17  
15.2  
41.5  
250/114  
530/241  
530/241  
39  
42  
45  
60  
60  
70  
23.9  
26.3  
26.3  
156  
161  
161  
MCR-33-102, 400 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME  
MDLZ0291C 29,187 5/8 M5  
13/8  
MCR-33-102, 500 LB. CAPACITY, 2 HOUR PULL DOWN TIME  
6
17  
560/255  
47  
70  
28.2  
161  
MDLZ0291C  
BSLZ0750C  
BCLZ0600C  
BCLZ0600E  
6
71/2  
6
29,187  
26,006  
26,466  
26,466  
5/8  
1/2  
5/8  
5/8  
13/8  
7/8  
13/8  
13/8  
M5  
C
C
17  
560/255  
550/250  
560/255  
560/255  
47  
54  
46  
26  
70  
80  
70  
35  
28.2  
30.9  
28.2  
13.3  
161  
189  
161  
80  
41.5  
41.5  
41.5  
2
C
**Based on 90°F ambient  
***Electrical ratings for condensing unit only. See National  
Electrical Code if units are combined on a single circuit.  
*VOLTAGE KEY:  
“B” suffix = 208-230 or 230 volt, 60 cycle, one phase  
“C” suffix = 200-230 or 208-230 volt, 60 cycle, three phase  
“E" suffix = 460 volt, 60 cycle, three phase  
3
 
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS  
UNIT CONNECTION  
SIZES  
BTUH  
@ -10°F  
SUCTION  
DIMENSIONS RECEIVER  
COND.  
UNIT  
MODEL*  
SEE  
DRAWING...  
(PP. 4-5)  
PUMP-  
DOWN  
SHIP  
WT.  
H.P. TEMP.** LIQUID SUCTION  
CAP. @ 90% (LB/KG) MCA** MOP** RLA** LRA**  
MCR-33-102, 500 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME  
MDLZ0331C  
BCLZ0750C  
BCLZ0750E  
6
71/2  
71/2  
32,417  
37,322  
37,322  
5/8  
7/8  
7/8  
13/8  
13/8  
13/8  
M5  
D
D
17  
53.4  
53.4  
560/255  
730/332  
730/332  
50  
55  
32  
70  
80  
40  
30.3  
31.5  
16.1  
150  
161  
83  
MCR-33-102, 500 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME  
BCLZ1500C  
BCLZ1500E  
15  
15  
70,782  
70,782  
7/8  
7/8  
15/8  
15/8  
F
F
116.1  
116.1  
990/450  
990/450  
90  
51  
125  
70  
52.6  
26.3  
278  
139  
MCR-33-102, 500 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME – WATER-COOLED CONDENSING UNITS  
SCLZ100WC 10  
SCLZ100WE 10  
54,800  
54,800  
7/8  
7/8  
13/8  
13/8  
E
E
105.3  
105.3  
910/414  
910/414  
66  
34  
100  
50  
42  
18.6  
215  
106  
*VOLTAGE KEY:  
“B” suffix = 208-230 or 230 volt, 60 cycle, one phase  
“C” suffix = 200-230 or 208-230 volt, 60 cycle, three phase  
“E" suffix = 460 volt, 60 cycle, three phase  
**Based on 90°F ambient  
***Electrical ratings for condensing unit only. See National Electrical Code if units are combined on a single circuit.  
BASE “C”  
BASE “D”  
BASE “E”  
4
 
MASTER-CHILLMCR-33-101 & MCR-33-102 SERIES  
ROLL-IN & PASS-THRU BLAST CHILLERS  
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS (cont.)  
BASE “F”  
BASE “M2”  
BASE “M3”  
BASE “M5”  
5
 
BID SPECIFICATIONS  
Item no. MCR-33-______  
tain one 30" x 78" flush mount-  
ed, polyurethane foamed door.  
Pass-thru models will contain  
two doors. Doors will be provid-  
ed with a 36" high 16 ga. stainless  
steel kickplate on the exterior.  
Doors will also be supplied with a  
hold-open feature, magnetic gas-  
kets and gasket heater.  
Blast chillers will be provided  
with an air- or water-cooled con-  
densing unit depending on ap-  
plication requirements.  
• Audible alarm at end of chill-  
ing cycle  
• Six programmable one-touch  
preset chilling programs for  
easy use  
Blast chillers will be supplied  
with stainless steel racks (one  
rack for MCR-33-101/33-101PT,  
two for MCR-33-102/33-102PT)  
mounted on heavy-duty swivel  
casters. Racks accommodate  
26 pans, 12" x 20" x 21/2", two  
per each of 13 ledges. Each pan  
holds up to 10 lbs. of food for to-  
tal rack quantity of 260 lbs. Di-  
mensions of rack are 241/2" wide  
x 27" deep x 685/16" high.  
Provide______ (  
) Roll-in or  
Pass-thru Blast Chiller(s)  
Master-Bilt model number  
MCR-33-______.  
Blast chiller to be provided  
with stainless steel construction  
and polyurethane foamed-in-  
place insulation. Blast chiller will  
feature high velocity forced air  
convection through evaporator  
coil.  
Probes with sequential read-  
out display will be supplied for  
food temperature recording (four  
probes in MCR-33-101 model,  
eight in MCR-33-102).  
Blast chiller will be equipped  
with a standard exterior mount-  
ed control panel featuring the  
following:  
An automatic chill cycle  
control with food temperature  
probes is also supplied.  
A thermometer will be pro-  
vided for recording blast chiller  
ambient air temperature. Ther-  
mometer will require optional  
printer for record of tempera-  
tures.  
• On/off switch  
Blast chillers to have standard  
limited one year extended com-  
pressor warranty (optional four  
year extended warranty avail-  
able) with one year limited parts  
and limited 10 year for panels.  
Blast chillers will be UL and  
C-UL listed and UL EPH classified.  
• Digital readout of interior ambi-  
ent temperature and probe tem-  
peratures  
• Digital cycle timer for timed  
chilling  
• Microprocessor control system  
enclosed in easily accessible box  
• Automatic defrost cycle and  
hold cycle  
Roll-in blast chillers will con-  
NOTE: All specifications subject to change without notice.  
908 Highway 15 North • New Albany, MS 38652  
1287 - 2/08-web  
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.  
 

Laarsen Associates Swimming Pool Heater LG LD User Manual
Lexmark All in One Printer 13B0500 User Manual
Life Fitness Treadmill 93Ti User Manual
LOREX Technology Security Camera L15D424321B User Manual
LumiSource Indoor Furnishings LS VIVIDFL XX User Manual
Magnavox DVD Recorder MDR513H User Manual
Makita Cordless Drill 6706DW User Manual
Maretron Network Card ALM100 User Manual
Master Bilt Refrigerator MTD 06 User Manual
Meade Telescope LX200GPS SMT User Manual